Resource Type

  • Product Testing and Laboratory Eligibility Policy

    Version 3.1

    This document explains how manufacturers can obtain valid test results for use by Lighting Global from a qualified test lab, as well as how a test laboratory can become approved to produce test results that will be accepted by the Lighting Global Quality Assurance (QA) program. Product Testing Process 1) Random Sampling (Quality Test Method … Read More

  • Non-Plug-and-Play Terminals Policy

    Version 1

    This policy explains the requirements that must be met for a product with non-plug-and-play terminals to be eligible for the Lighting Global Quality Assurance (QA) program, and provides examples of acceptable and unacceptable terminals and connectors. For a product to be eligible for the Lighting Global QA program, all electrical connections, except for permanent connections … Read More

  • Pico-PV Quality Standards

    Lighting Global maintains the Quality Standards, a set of off-grid lighting benchmarks that set a baseline level of quality, durability, and truth-in-advertising to protect consumers. These Standards apply to products with power up to and including 10 W. [Note: products with peak power ratings greater than 10 W and up to 350 W are held to … Read More

  • 微型太阳能产品质量标准 (Pico-PV Quality Standards)

    点亮全球项目使用产品质量标准来保护消费者权益。产品质量标准针对离网照明产品设定了产品质量、耐用性和广告真实性的基准要求。该质量标准适用于最大功率10W的产品。[注:功率大于10W但不超过350W的产品应根据太阳能家用系统质量标准来评估。如果功率介于11-15W的产品因其他项目规定,而需要依照微型太阳能产品质量标准进行测试,每项测试将多使用两个样本进行评估,并且产品需要同时符合太阳能系统以及微型太阳能产品质量标准。] 产品是否符合质量标准是根据实验室检测结果来判定的。实验室采用点亮全球产品质量测试方法(QTM)对产品进行测试。该测试方法来自于国际电工委员会IEC最新版本的技术标准(Technical Specification)62257-9-5。符合质量标准的产品将得到标准产品规格表(Specifications Sheet)和证书(Verification Letter),并会被发布在点亮全球的网站上: www.lightingglobal.org/products. 最新版本的质量标准可以从下面的链接下载。质量标准已经翻译成中文,但如果中文版本和英文版本有理解或释义上的出入,以英文版本为准。

  • Normes de qualité pico-PV (Pico-PV Quality Standards)

    Lighting Global maintient les Normes de qualité, une suite des références qui établit un ensemble des niveaux de base de qualité, durabilité, et de la publicité non mensongère pour protéger les consommateurs. Ces Normes appliquent aux produits ayant une puissance jusqu’au 10 W inclus. [Remarque : Les produits ayant une puissance plus que 10W jusqu’au 350 … Read More

  • Solar Home System Kit Quality Standards

    This document describes the Quality Standards for Solar Home System Kits, which set a baseline level of quality, durability, and truth in advertising to protect consumers. Kits covered by these Standards must have a peak power of 350 W or less and a DC voltage of 35 V or less. [Note, products 10 W and smaller are … Read More

  • 太阳能家用系统质量标准 (Solar Home System Kit Quality Standards)

    本文件描述了家用太阳能系统的质量标准。该质量标准设定了产品质量、耐用性和广告真实性的基准要求,以保护消费者权益。该质量标准覆盖的太阳能系统必须最大功率不超过350W, 直流电压不超过35V。[注:功率小于10W的产品应根据微型太阳能产品质量标准来评估。 如果功率介于11-15W的产品因其他项目规定,而需要依照微型太阳能产品质量标准进行测试,每项测试将多使用两个样本进行评估,并且产品需要同时符合太阳能系统以及微型太阳能产品质量标准。] 产品是否符合质量标准是根据实验室检测结果来判定的。实验室采用点亮全球家用太阳能系统质量测试方法(QTM)对产品进行测试。符合质量标准的产品将得到标准产品规格表(Specifications Sheet)和证书(Verification Letter),并会被发布在点亮全球的网站上: www.lightingglobal.org/products. 最新版本的质量标准可以从下面的链接下载。质量标准已经翻译成中文,但如果中文版本和英文版本有理解或释义上的出入,以英文版本为准。

  • Change Log for Quality Standards

    This document presents a list of all the changes made to the Quality Standards over time. Table 1 describes the changes made to the standards for pico-PV products (products with a peak PV power of 10 W or less). Table 2 describes the changes made to the standards for solar home system (SHS) kits (products … Read More

  • Conditional Pass Policy

    Version 3

    This document outlines the treatment of products that do not fully meet the Lighting Global Quality Standards due to an easy-to-fix issue that can be addressed without retesting. In cases where a product does not fully meet the Quality Standards due to one of these issues, we typically use the term “conditional pass” to describe … Read More